PTO Link™ Compact– Replacement Shear/Locking Pin & Plunger Pin Combo

$29.99

The PTO Link® Compact - Safety Bolt is designed to fully align the connected couplers of the PTO Link® System. The required Safety Bolt further secures the couplers, much like a deadbolt lock, to minimize vibration and wear to the driveline, withstand most high-torque scenarios or instances of reverse torque on the PTO shaft, and provide safety, protection, and durability to the PTO Link® System.

Product Features:

• Installs from the tractor or implement side • Stand-alone one-piece locking ball detent clevis pin (bolt) for quick and easy removal • Grade 8 bolt, stainless steel spring-loaded ball detent (rated shear strength at 150 ksi) • Ball detent depresses and springs up to hold the Clevis Pin/Bolt into place

• Dimensions: 1.225ʺ L x 0.630ʺ W • Weight: 1.1 oz; Shipping weight: 2 oz

NOTE: A Safety Bolt is included with every Compact Tractor (Female) Coupler, but spares are recommended since it is a stand-alone bolt and can be misplaced when not in use.

IMPORTANT SAFETY NOTE: Since high torque or reverse torque scenarios on the PTO are often unforeseen, installing the Safety Bolt while using the PTO Link® system is always required.

The PTO Link® Compact - Safety Bolt is designed to fully align the connected couplers of the PTO Link® System. The required Safety Bolt further secures the couplers, much like a deadbolt lock, to minimize vibration and wear to the driveline, withstand most high-torque scenarios or instances of reverse torque on the PTO shaft, and provide safety, protection, and durability to the PTO Link® System.

Product Features:

• Installs from the tractor or implement side • Stand-alone one-piece locking ball detent clevis pin (bolt) for quick and easy removal • Grade 8 bolt, stainless steel spring-loaded ball detent (rated shear strength at 150 ksi) • Ball detent depresses and springs up to hold the Clevis Pin/Bolt into place

• Dimensions: 1.225ʺ L x 0.630ʺ W • Weight: 1.1 oz; Shipping weight: 2 oz

NOTE: A Safety Bolt is included with every Compact Tractor (Female) Coupler, but spares are recommended since it is a stand-alone bolt and can be misplaced when not in use.

IMPORTANT SAFETY NOTE: Since high torque or reverse torque scenarios on the PTO are often unforeseen, installing the Safety Bolt while using the PTO Link® system is always required.

The PTO Link® Compact System - Tractor (Female) Coupler comes preinstalled with a Spring-loaded Locking Pin. This pin assembly engages with the Implement (Male) Coupler for the initial locking connection to prevent the two couplers from uncoupling.

Product Features:

• Includes Loctite® Threadlocker Red 271TM

• Spring-loaded

• Stainless Steel

• Auto-lock and Easy-pull design when coupling the PTO Link® System • Dimensions: 1.75” L x 0.75” W (3/8” Threads) • Weight: 2.4 oz; Shipping weight: 4 oz

IMPORTANT INSTRUCTIONS FOR REPLACEMENT:

• Remove the installed Locking Pin housing from the tractor coupler with vise-grips or 5/8” open-end wrench. Heat may need to be applied to the Locking Pin’s housing and coupler threads for removal.

• Apply Loctite® Threadlocker Red 271TM to the threads of the Tractor Coupler and the Locking Pin to prevent backing out. • Wrench the replacement Locking Pin into the Tractor Coupler and torque it down.

• Wipe away excess LocLte® Threadlocker Red 271TM from the top and bopom of the Locking Pin.

IMPORTANT SAFETY NOTE: Always install the stand-alone PTO Link® Compact - Safety Bolt after connecting the PTO Link® System Couplers.