PTO Link® HD-Plus System – Safety Plunger Pin (SLIC Pin®) - Optional

NOTICE: The new Quarter-Turn Locking Pin is now standard on new purchases of the HD-PLUS Tractor Coupler and also available as a single Locking Pin upgrade for previous HD System users who want to replace the current non-Quarter-Turn Locking Pin to gain the full benefit of having the Locking Pin “lock open” during the uncoupling process.

The PTO Link® HD-PLUS System is our most versatile model.  It’s designed for heavy duty applications with compact or utility tractors rated from 35 HP up to 165 HP (engine gross), and with most 3-point hitch or pull behind (drawbar) implements.   PTO Link® is the original, universal PTO quick-connect system consisting of two interconnecting steel couplers. Its patented Open-Plate™ system replaces the traditional spline-to-driveline connection with a visible interface design that’s both easy to see and reach. Now you can quickly and safely connect / disconnect implements at the tractor’s PTO in just seconds! A complete PTO Link® System requires both a Tractor (Female) Coupler and an Implement (Male) Coupler. For best results, every tractor should be equipped with a Tractor Coupler, and every power-driven implement should be equipped with an Implement Coupler.  The PTO Link® System adds 5 inches to the implement’s driveline. 

PTO Link® is the original, universal PTO quick-connect system consisting of two interconnecting couplers. Its patented Open-Plate™ system replaces the traditional spline-to-driveline connection with a visible interface design that’s both easy to see and reach. Now you can quickly and safely connect / disconnect implements at the tractor’s PTO in just seconds! A complete PTO Link® System requires both this Tractor (Female) Coupler and an Implement (Male) Coupler. For best results, every tractor should be equipped with a Tractor Coupler, and every implement should be equipped with an Implement Coupler.  See more descriptions, product features and safety information below.

Designed for:

• Any compact or utility tractor (from 35 HP up to 165 HP) with Category 1 or 2 implements

• Any pull-behind implements, including flex-wing or batwing rotary cutters

• Tractor owners who operate in a rough environment.

• Standard PTO spline length (3″ and longer)

• High Torque (>650 ft.lbs) scenarios or with heavy duty implements (e.g., stump grinders, balers, augers, flail mowers, water pumps, large tillers) where reverse torque is common

• The exception tractor models listed below must use the PTO Link® Compact System as the only compatible option (the SD and HD-PLUS Systems are not compatible to the following):

  • Kubota BX* Series

  • Kubota B Series

  • Kubota LX Series

  • Kioti CS Series

  • Yanmar SA Series

  • John Deere 2520 (2005-2013)

  • New Holland Workmaster 25 S

  • Cub Cadet 6284D

  • Bad Boy 3026

  • LS MT122, MT125 & MT225

  • Mahindra Models 1526, 1626 & 2126

  • Massey Ferguson 25, 1010, 1020, 1030 & 1035

Note: The HD-PLUS System adds 5 inches to the implement’s driveline.